Don't have your VIN Number?
Click here to send yourself a reminder.

Just What Is a Car Recall? Car Safety Recall Definition - A safety recall is an automotive manufacturer's way of notifying vehicle customers that their product has a flaw. The automobile problem is serious enough that if you do not correct the flaw your and/or your passengers' safety could be at risk. Generally recalls are initiated by the US Government, but sometimes individual car manufacturers will pre-emptively initiate a recall.

Where Do I Find My VIN (Vehicle Identification Number)? Look on the lower left of your car’s windshield for your 17-digit Vehicle Identification Number (VIN). Your VIN is also located on your car’s registration card, and it may be shown on your insurance card.

Auto Tip - How Do I Find Out If My Vehicle Has A Recall? ==> An easy way to determine if you have an active car recall is to just enter your VIN number at the top of this page and CarFax will report if there are any issues at all with your vehicle.

vin-number

Volvo WAH

  • VOLVO WAH 2000

    ON SOME HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS, THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.

  • VOLVO WAH 1999

    ON SOME HEAVY DUTY CLASS 8 VEHICLES EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS, THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS.

  • VOLVO WAH 1999

    VEHICLE DESCRIPTION: HEAVY DUTY, CLASS 8, TRUCKS EQUIPPED WITH TIE ROD ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET.

  • VOLVO WAH 2000

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.

  • VOLVO WAH 1999

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.

  • VOLVO WAH 1998

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.

  • VOLVO WAH 1997

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.

  • VOLVO WAH 1998

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH HALDEX MANIFOLD DASH VALVES (MDV) USED IN TRACTOR AND TRAILER PARKING BRAKES. THESE VALVES DO NOT MEET THE REQUIREMENTS OF FMVSS NO. 121, AIR BRAKE SYSTEMS. A LOSS OF THE ISOLATION OF THE TWO BRAKE SYSTEM CIRCUITS CAN RESULT IN THE LOSS OF SERVICE BRAKES WHEN THERE IS ANOTHER FAILURE OF ONE OF THE TWO BRAKE CIRCUITS.

  • VOLVO WAH 1997

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH HALDEX MANIFOLD DASH VALVES (MDV) USED IN TRACTOR AND TRAILER PARKING BRAKES. THESE VALVES DO NOT MEET THE REQUIREMENTS OF FMVSS NO. 121, AIR BRAKE SYSTEMS. A LOSS OF THE ISOLATION OF THE TWO BRAKE SYSTEM CIRCUITS CAN RESULT IN THE LOSS OF SERVICE BRAKES WHEN THERE IS ANOTHER FAILURE OF ONE OF THE TWO BRAKE CIRCUITS.

  • VOLVO WAH 1993

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1992

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1991

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1990

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1989

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1988

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH FONTAINE FIFTH WHEEL ASSEMBLIES, MODELS SL5WMS6125, SL5WMS7125, SL5WMS8125, SL5WMS9125, SL5WMS10125, SL5APM6125, SL5APM7125, SLAPM8125, SL5APM9125, SL5APM10125, SL5WMS-D, SL5APM-D, AND SL5BPS-D. IMPROPER INSTALLATION OF THE FIFTH WHEEL ASSEMBLY CAN CAUSE CRACKING OF THE FIFTH WHEEL MOUNTING PLATE.

  • VOLVO WAH 1999

    VEHICLE DESCRIPTION: HEAVY DUTY CLASS 8 TRUCKS. THE ANTILOCK BRAKE SYSTEM (ABS) WIRE IN THE TRAILER CABLE JUNCTION BOX AT THE END OF THE FRAME MAY NOT CONTAIN POWER FOR THE TRAILER ABS AS REQUIRED BY FMVSS NO. 121, AIR BRAKE SYSTEMS.

  • VOLVO WAH 1996

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE AIR SUSPENSION CONTROL VALVE SUPPLY LINE WAS NOT PLUMBED THROUGH AN AIR PRESSURE PROTECTION VALVE. IN THE EVENT OF A FAILURE, THERE WOULD BE LOSS OF AIR PRESSURE IN THE 'B' SYSTEM AIR RESERVOIR THAT SUPPLIES AIR PRESSURE FOR THE FRONT STEER AXLE BRAKES.

  • VOLVO WAH 1997

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE AIR SUSPENSION CONTROL VALVE SUPPLY LINE WAS NOT PLUMBED THROUGH AN AIR PRESSURE PROTECTION VALVE. IN THE EVENT OF A FAILURE, THERE WOULD BE LOSS OF AIR PRESSURE IN THE 'B' SYSTEM AIR RESERVOIR THAT SUPPLIES AIR PRESSURE FOR THE FRONT STEER AXLE BRAKES.

  • VOLVO WAH 1998

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE AIR SUSPENSION CONTROL VALVE SUPPLY LINE WAS NOT PLUMBED THROUGH AN AIR PRESSURE PROTECTION VALVE. IN THE EVENT OF A FAILURE, THERE WOULD BE LOSS OF AIR PRESSURE IN THE 'B' SYSTEM AIR RESERVOIR THAT SUPPLIES AIR PRESSURE FOR THE FRONT STEER AXLE BRAKES.

  • VOLVO WAH 1994

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE AIR SUSPENSION CONTROL VALVE SUPPLY LINE WAS NOT PLUMBED THROUGH AN AIR PRESSURE PROTECTION VALVE. IN THE EVENT OF A FAILURE, THERE WOULD BE LOSS OF AIR PRESSURE IN THE 'B' SYSTEM AIR RESERVOIR THAT SUPPLIES AIR PRESSURE FOR THE FRONT STEER AXLE BRAKES.

  • VOLVO WAH 1995

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE AIR SUSPENSION CONTROL VALVE SUPPLY LINE WAS NOT PLUMBED THROUGH AN AIR PRESSURE PROTECTION VALVE. IN THE EVENT OF A FAILURE, THERE WOULD BE LOSS OF AIR PRESSURE IN THE 'B' SYSTEM AIR RESERVOIR THAT SUPPLIES AIR PRESSURE FOR THE FRONT STEER AXLE BRAKES.

  • VOLVO WAH 1998

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AFTERMARKET ALUMINUM DUAL WHEELS, 22.5X8.25, ONE-PIECE, TUBELESS, SUPPLIED BY ACCURIDE/AKW. CERTAIN DESIGN REVISIONS COMBINED WITH PROCESS CONDITIONS CAUSED FATIGUE CRACKS IN THESE WHEELS.

  • VOLVO WAH 1997

    VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH AFTERMARKET ALUMINUM DUAL WHEELS, 22.5X8.25, ONE-PIECE, TUBELESS, SUPPLIED BY ACCURIDE/AKW. CERTAIN DESIGN REVISIONS COMBINED WITH PROCESS CONDITIONS CAUSED FATIGUE CRACKS IN THESE WHEELS.

  • VOLVO WAH 1997

    VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS. THE STEER AXLE WHEEL BEARING JAM NUT LOCK WASHER MAY NOT HAVE BEEN BENT OVER THE JAM NUT AFTER THE WHEEL BEARINGS WERE ADJUSTED.

  • VOLVO WAH 1995

    THE REAR SUSPENSION AXLE RETENTION PLATE CAN BREAK UNDER NORMAL USE, AFFECTING AXLE ALIGNMENT.

  • VOLVO WAH 1994

    UNDERCOATING APPLIED TO THE INSIDE OF THE CAB SHELL SQUEEZED OUT DURING ASSEMBLY ONTO THE BRAKE PEDAL PLUNGER.

  • VOLVO WAH 1995

    UNDERCOATING APPLIED TO THE INSIDE OF THE CAB SHELL SQUEEZED OUT DURING ASSEMBLY ONTO THE BRAKE PEDAL PLUNGER.