Just What Is a Car Recall? Car Safety Recall Definition - A safety recall is an automotive manufacturer's way of notifying vehicle customers that their product has a flaw. The automobile problem is serious enough that if you do not correct the flaw your and/or your passengers' safety could be at risk. Generally recalls are initiated by the US Government, but sometimes individual car manufacturers will pre-emptively initiate a recall.
Where Do I Find My VIN (Vehicle Identification Number)? Look on the lower left of your car’s windshield for your 17-digit Vehicle Identification Number (VIN). Your VIN is also located on your car’s registration card, and it may be shown on your insurance card.
Auto Tip - How Do I Find Out If My Vehicle Has A Recall? ==> An easy way to determine if you have an active car recall is to just enter your VIN number at the top of this page and CarFax will report if there are any issues at all with your vehicle.
VEHICLE DESCRIPTION: SCHOOL BUSES BUILT ON GM P3 CUTAWAY CHASSIS. THE SCHOOL BUS, WHEN TESTED IN ACCORDANCE WITH FMVSS NO. 301, EXCEEDED THE ALLOWABLE FUEL SPILLAGE AS SPECIFIED BY THE STANDARD. THE FUEL TANK WAS PUNCTURED AS A RESULT OF THE IMPACT OF THE MOVING BARRIER.
VEHICLE DESCRIPTION: SCHOOL BUSES BUILT ON GM P3 CUTAWAY CHASSIS. THE SCHOOL BUS, WHEN TESTED IN ACCORDANCE WITH FMVSS NO. 301, EXCEEDED THE ALLOWABLE FUEL SPILLAGE AS SPECIFIED BY THE STANDARD. THE FUEL TANK WAS PUNCTURED AS A RESULT OF THE IMPACT OF THE MOVING BARRIER.
VEHICLE DESCRIPTION: SCHOOL BUSES BUILT ON GM P3 CUTAWAY CHASSIS. THE SCHOOL BUS, WHEN TESTED IN ACCORDANCE WITH FMVSS NO. 301, EXCEEDED THE ALLOWABLE FUEL SPILLAGE AS SPECIFIED BY THE STANDARD. THE FUEL TANK WAS PUNCTURED AS A RESULT OF THE IMPACT OF THE MOVING BARRIER.
THE ENGINE COOLING FAN ASSEMBLIES CAN BREAK FROM FATIGUE CAUSED BY ENGINE AND/OR VEHICLE INDUCED STRESSES.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
THE 19.5 X 6 FRONT STEEL WHEEL DISC CRACKS OUTSIDE THE MOUNTING BOLT CIRCLE AND ENDS AT THE HUB'S DIAMETER.
BRAKES MAY HAVE MISSING REAR AXLE OUTER BEARING RETAINING RING AND OR GREATER THAN SPECIFIED BEARING END PLAY. EITHER CONDITION ALLOWS THE ROTOR AND HUB ASSEMBLY TO SHIFT POSITION RELATIVE TO THE SPINDLE. THIS MOVEMENT CAN CAUSE BRAKE CALIPER PISTON RECEDE FARTHER THAN NORMAL INTO THE PISTON BORE WHICH WOULD REQUIRE GREATER THAN NORMAL BRAKE FLUID DISPLACEMENT WHEN THE SERVICE BRAKES ARE APPLIED.
