Just What Is a Car Recall? Car Safety Recall Definition - A safety recall is an automotive manufacturer's way of notifying vehicle customers that their product has a flaw. The automobile problem is serious enough that if you do not correct the flaw your and/or your passengers' safety could be at risk. Generally recalls are initiated by the US Government, but sometimes individual car manufacturers will pre-emptively initiate a recall.
Where Do I Find My VIN (Vehicle Identification Number)? Look on the lower left of your car’s windshield for your 17-digit Vehicle Identification Number (VIN). Your VIN is also located on your car’s registration card, and it may be shown on your insurance card.
Auto Tip - How Do I Find Out If My Vehicle Has A Recall? ==> An easy way to determine if you have an active car recall is to just enter your VIN number at the top of this page and CarFax will report if there are any issues at all with your vehicle.
IF THE AIR CONDITIONER COMPRESSOR CLUTCH ASSEMBLY CONTACTS THE AUXILIARY ENGINE OIL COOLER OUT HOSE, THE HOSE MAY WEAR THROUGH ALLOWING ENGINE OIL TO LEAK IN THE ENGINE COMPARTMENT.
PAINT ON THE WHEEL MOUNTING SURFACES CAN ACT AS A SHIM BETWEEN THE WHEEL AND THE ROTOR/DRUM. AS THE VEHICLE IS DRIVEN, THE WHEEL IMBEDS INTO THE PAINT, LOOSENING THE LUG NUT AND CAUSING A LOSS OF CLAMP LOAD.
THE ENGINE OIL COOLER INLET HOSE MAY HAVE BEEN INSTALLED TOO CLOSE TO THE STEERING GEAR CAUSING CHAFING. THE CHAFING CAN EVENTUALLY WEAR THROUGH THE HOSE'S PROTECTIVE SLEEVE RESULTING IN ENGINE OIL LEAKING ONTO THE ENGINE.
THE THROTTLE CABLE CAN BECOME DISENGAGED FROM THE RETAINING BRACKET.
THE THROTTLE CABLE CAN BECOME DISENGAGED FROM THE RETAINING BRACKET.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FILTERS WERE PRODUCED WITH AN INCORRECT THREADED FITTING. THE INCORRECT FITTING IS SIMILIAR ENOUGH IN SIZE THAT THE FUEL FILTER MAY APPEAR TO BE CORRECTLY THREADED ONTO THE FUEL LINE.
THE FUEL FEED AND RETURN LINES TO THE ENGINE FUEL INJECTION SYSTEM WERE NOT FULLY ASSEMBLED AND LOCKED. THE LINES CAN WORK LOOSE, CAUSING A FUEL LEAK IN THE ENGINE COMPARTMENT.
THE FUEL FEED AND RETURN LINES TO THE ENGINE FUEL INJECTION SYSTEM WERE NOT FULLY ASSEMBLED AND LOCKED. THE LINES CAN WORK LOOSE, CAUSING A FUEL LEAK IN THE ENGINE COMPARTMENT.
THE PASSENGER SIDE AIR BAG CAN EXPERIENCE AN INFLATOR IGNITION DELAY IN THE EVENT OF AN ACCIDENT. THIS DOES NOT COMPLY WITH FMVSS 208, OCCUPANT CRASH PROTECTION.
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
THE INCREASED WEIGHT OF THE STRETCH CONVERSION LIMOUSINES REQUIRES LARGER DIAMETER REAR WHEEL BRAKE CYLINDERS THAN THOSE INSTALLED IN THE FACTORY.
THE INTERMEDIATE SHAFT TO STEERING RACK LOWER COUPLING PINCH BOLT MAY BE MISSING.
THE INTERMEDIATE SHAFT TO STEERING RACK LOWER COUPLING PINCH BOLT MAY BE MISSING.
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
REAR WHEEL BRAKE CYLINDERS ARE TOO SMALL TO ALLOW FOR PROPER BRAKING.
