Just What Is a Car Recall? Car Safety Recall Definition - A safety recall is an automotive manufacturer's way of notifying vehicle customers that their product has a flaw. The automobile problem is serious enough that if you do not correct the flaw your and/or your passengers' safety could be at risk. Generally recalls are initiated by the US Government, but sometimes individual car manufacturers will pre-emptively initiate a recall.
Where Do I Find My VIN (Vehicle Identification Number)? Look on the lower left of your car’s windshield for your 17-digit Vehicle Identification Number (VIN). Your VIN is also located on your car’s registration card, and it may be shown on your insurance card.
Auto Tip - How Do I Find Out If My Vehicle Has A Recall? ==> An easy way to determine if you have an active car recall is to just enter your VIN number at the top of this page and CarFax will report if there are any issues at all with your vehicle.
THE WINDSHIELDS WERE INSTALLED WITH INCORRECT WINDSHIELD OPENING PINCH-WELD-FLANGE PRIMER. THIS PRIMER WILL NOT PROPERLY ETCH THE PAINTED SURFACE OF THE FLANGE, ALLOWING THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 212, WINDSHIELD MOUNTING.
THE WINDSHIELDS WERE INSTALLED WITH INCORRECT WINDSHIELD OPENING PINCH-WELD-FLANGE PRIMER. THIS PRIMER WILL NOT PROPERLY ETCH THE PAINTED SURFACE OF THE FLANGE, ALLOWING THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 212, WINDSHIELD MOUNTING.
THE WINDSHIELDS WERE INSTALLED WITH INCORRECT WINDSHIELD OPENING PINCH-WELD-FLANGE PRIMER. THIS PRIMER WILL NOT PROPERLY ETCH THE PAINTED SURFACE OF THE FLANGE, ALLOWING THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 212, WINDSHIELD MOUNTING.
THE FRONT AND/OR REAR TANK MOUNTING STRAPS CAN CRACK OR BREAK.
THE FUEL LINES ATTACHED TO THE FUEL TANK WERE NOT PROPERLY TIGHTENED.
THE AUTO APPLY PARKING BRAKE SYSTEM FAILS TO RELEASE THE PARKING BRAKES AFTER ACTION HAS BEEN TAKEN TO RELEASE THEM OR THE SYSTEM MAY AUTOMATICALLY APPLY THE PARKING BRAKE WHILE THE VEHICLE IS IN MOTION. IN EITHER CASE, IF THE DRIVER DOES NOT NOTICE THE TELLTALE RED BRAKE LIGHT AND STOP THE VEHICLE, THE SYSTEM WILL FAIL.
THE TRANSFORMER USED TO POWER THE NEON CENTER LIGHTBEAM CAN OVERHEAT AND CATCH ON FIRE.
THE TRANSFORMER USED TO POWER THE NEON CENTER LIGHTBEAM CAN OVERHEAT AND CATCH ON FIRE.
THE LOWER CONTROL ARM CAN CRACK AT THE FLANGE ON THE END OF THE CONTROL ARM NEAR THE BALL JOINT PAD.
THE LOWER CONTROL ARM CAN CRACK AT THE FLANGE ON THE END OF THE CONTROL ARM NEAR THE BALL JOINT PAD.
THE TRAILER HITCH ATTACHING BOLTS WERE NOT TIGHTENED TO THE SPECIFIED TORQUE. THIS CAN LEAD TO LOOSENING AND SUBSEQUENT BREAKAGE OF THE FASTENERS.
SIGNIFICANT WEAR CAN DEVELOP ON THE LOW AND REVERSE CLUTCH PREVENTING THE PARK PAWL FROM ENGAGING. THIS CAN PREVENT A NO PARK CONDITION TO OCCUR WHILE THE ENGINE IS RUNNING, CAUSING UNINTENTIONAL MOVEMENT OF THE VEHICLE WITHOUT OPERATOR ACTION. (THE NO PARK CONDITION WILL NOT OCCUR WHILE THE ENGINE IS OFF.)
SIGNIFICANT WEAR CAN DEVELOP ON THE LOW AND REVERSE CLUTCH PREVENTING THE PARK PAWL FROM ENGAGING. THIS CAN PREVENT A NO PARK CONDITION TO OCCUR WHILE THE ENGINE IS RUNNING, CAUSING UNINTENTIONAL MOVEMENT OF THE VEHICLE WITHOUT OPERATOR ACTION. (THE NO PARK CONDITION WILL NOT OCCUR WHILE THE ENGINE IS OFF.)
THE MANUFACTURER'S CERTIFICATION LABEL AND/OR THE DRIVER AIR BAG ADVISORY LABEL MAY BE MISSING FROM THE VEHICLES, WHICH DOES NOT CONFORM TO THE REQUIREMENTS OF 49 CFR 567.
THE MANUFACTURER'S CERTIFICATION LABEL AND/OR THE DRIVER AIR BAG ADVISORY LABEL MAY BE MISSING FROM THE VEHICLES, WHICH DOES NOT CONFORM TO THE REQUIREMENTS OF 49 CFR 567.
ON SOME VEHICLES, THE SEALING SURFACES FOR A HYDRAULIC BRAKE HOSE ON A FRONT BRAKE CALIPER WERE COVERED BY PAINT RESIDUE. BRAKE FLUID GRADUALLY DISSOLVES THE PAINT, OPENING A SMALL PATH BETWEEN THE SEALING SURFACE AND THE GASKET ALLOWING BRAKE FLUID TO LEAK WHEN THE BRAKE IS APPLIED.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
VEHICLES ALTERED BY PAS, INC. HAVE COMPRESSED NATURAL GAS FUEL TANKS THAT CAN DEVELOP STRESS CORROSION, WHICH CRACK THE E-GLASS WRAPPING. THIS STRESS CORROSION CRACKING CAN LEAD TO TANK RUPTURES.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
TRUCKS WERE ASSEMBLED WITH THE LEFT-HAND LOWER CONTROL ARM TO FRAME REAR NUT TIGHTENED BELOW THE SPECIFIED TORQUE. LOW TORQUE ON THIS NUT MAY ALLOW THE ATTACHMENT BOLT TO LOOSED AND SUBSEQUENTLY FATIGUE AND BREAK. THE BOLT BREAKAGE CAN CAUSE THE LEFT HAND CONTROL ARM TO SEPARATE FROM THE FRAME.
ONE OF THE THREE SPECIFIED TRAILER HITCH FASTENERS PER SIDE IS MISSING WHICH CAN CAUSE THE EXISTING FASTENERS TO LOOSEN AND FAIL.
ONE OF THE THREE SPECIFIED TRAILER HITCH FASTENERS PER SIDE IS MISSING WHICH CAN CAUSE THE EXISTING FASTENERS TO LOOSEN AND FAIL.
