Just What Is a Car Recall? Car Safety Recall Definition - A safety recall is an automotive manufacturer's way of notifying vehicle customers that their product has a flaw. The automobile problem is serious enough that if you do not correct the flaw your and/or your passengers' safety could be at risk. Generally recalls are initiated by the US Government, but sometimes individual car manufacturers will pre-emptively initiate a recall.
Where Do I Find My VIN (Vehicle Identification Number)? Look on the lower left of your car’s windshield for your 17-digit Vehicle Identification Number (VIN). Your VIN is also located on your car’s registration card, and it may be shown on your insurance card.
Auto Tip - How Do I Find Out If My Vehicle Has A Recall? ==> An easy way to determine if you have an active car recall is to just enter your VIN number at the top of this page and CarFax will report if there are any issues at all with your vehicle.
THE ENGINE FAN BLADES ON THE INVOLVED VEHICLES MAY BE SUBJECT TO CRACKING DUE TO STRESSES GENERATED DURING NORMAL OPERATION. BLADES MAY FRACTURE AND FRAGMENTS WOULD BE PROPELLED FROM THE ROTATING FAN.
THE ENGINE FAN BLADES ON THE INVOLVED VEHICLES MAY BE SUBJECT TO CRACKING DUE TO STRESSES GENERATED DURING NORMAL OPERATION. BLADES MAY FRACTURE AND FRAGMENTS WOULD BE PROPELLED FROM THE ROTATING FAN.
THE INVOLVED VEHICLES WERE ASSEMBLED WITH INCORRECT ATTACHING U-NUTS USED TO SECURE THE REAR BUMPER LEFT ISOLATOR AND BRACKET ASSEMBLY. IN THE EVENT OF A REAR-END COLLISION, THE U-NUTS COULD CONTACT AND CUT THE FUEL TANK, CAUSING FUEL LEAKAGE.
THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.
THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.
THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.
THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.
THE INSTRUMENT PANELS ON THE INVOLVED VEHICLES CAN BE BROKEN DURING OCCUPANT IMPACT.
SEVEN-BLADE COOLING FANS INSTALLED ON THE INVOLVED VEHICLES MAY BE SUBJECT TO FATIGUE CRACKING OF THE BLADES DUE TO STRESSES GENERATED DURING NORMAL VEHICLE OPERATION.
SEVEN-BLADE COOLING FANS INSTALLED ON THE INVOLVED VEHICLES MAY BE SUBJECT TO FATIGUE CRACKING OF THE BLADES DUE TO STRESSES GENERATED DURING NORMAL VEHICLE OPERATION.
THE UPPER SUPPORT STRAP NUTS, ATTACHING THE FUEL TANK, WERE NOT TIGHTENED TO SPECIFICATIONS. THIS MAY ALLOW THE FUEL TANK TO DETACH AND FALL TO THE GROUND.
THE UPPER SUPPORT STRAP NUTS, ATTACHING THE FUEL TANK, WERE NOT TIGHTENED TO SPECIFICATIONS. THIS MAY ALLOW THE FUEL TANK TO DETACH AND FALL TO THE GROUND.
THE UPPER SUPPORT STRAP NUTS, ATTACHING THE FUEL TANK, WERE NOT TIGHTENED TO SPECIFICATIONS. THIS MAY ALLOW THE FUEL TANK TO DETACH AND FALL TO THE GROUND.
THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS. THESE LIGHT TRUCKS WERE INCORRECTLY CLASSIFIED AS PASSENGER VEHICLES AND WERE EQUIPPED WITH LOAD RANGE A INSTEAD OF LOAD RANGE B TIRES. THIS COULD LEAD TO INADVERTENT VEHICLE OVERLOADING.
THESE VEHICLES WERE EQUIPPED WITH INCORRECT FUEL TUBES AND REAR FUEL HOSES. THIS MAY CAUSE THE FUEL HOSE TO CONTACT THE LEFT EXHAUST OUTLET PIPE. THE HEAT FROM THE EXHAUST PIPE WILL DETERIORATE THE HOSE AND CAUSE A FUEL LEAK TO DEVELOP.
THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH LEFT DOOR LOCK ASSEMBLIES THAT CONTAIN PAWL SPRING RETAINERS THAT WERE NOT PRODUCED TO ENGINEERING SPECIFICATIONS. CONSEQUENTLY, THE SPRING COULD BREAK, CAUSING THE LATCH PAWL TO DISENGAGE FROM THE LATCH CAM.
THE SEAT BACK PIVOT PIN BRACKET ON THE INVOLVED VEHICLES MAY FAIL. CONSEQUENTLY, THE SEAT BACK WILL ROTATE REARWARD.
THE SEAT BACK PIVOT PIN BRACKET ON THE INVOLVED VEHICLES MAY FAIL. CONSEQUENTLY, THE SEAT BACK WILL ROTATE REARWARD.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH IMPROPERLY MANUFACTURED FRONT SPRING U-BOLTS USED TO SECURE THE FRONT AXLE ASSEMBLY TO THE SPRING. THE FOUR U-BOLTS MAY EXPERIENCE CRACKS AND COULD ULTIMATELY BREAK. SHOULD TWO U-BOLTS ON THE SAME SIDE OF THE VEHICLE BREAK, THE FRONT AXLE WOULD NOT BE RETAINED SECURELY.
THE FRONT WHEEL SPINDLE ON THE INVOLVED VEHICLES MAY CRACK IN SERVICE. SPINDLE STEM SEPARATION COULD OCCUR DUE TO FAILURE OF THE STEM AT THE INNER BEARING FILLET LOCATION.
